CHAPTER FIVE - OPTIONS: CHANNELS 1 and 2
64
SG-System I Operating Manual
5
Table 25: General Handshakes
All other frequencies can be programmed using the first two digits to represent the third and fourth decimal places (01 - 29).
Common Examples:
10 - 1000 Hz / 14 - 1400 Hz / 16 - 1600 Hz / 18 - 1800 Hz / 23 - 2300 Hz
Hexadecimal Value Description
00 No handshake
0B Modem II handshake
0C SIA FSK handshake
0E ITI and Modem IIE handshake
1A Robofon handshake
1B CESA handshake
1C Outel handshake
1D Single Dual Tone handshake 1400 Hz/100 msec pause and
2300 Hz/100 msec tone with a kiss off of 1400 Hz
1E Scantronics Dual Tone
1F Vonk (no handshake)
2D Double dual-tone handshake 1400 Hz/100 msec pause and
2300 Hz/100 msec tone with a kiss off of 1400 Hz
3B Scancom - single dual-tone handshake 1600 Hz/100 msec
pause and 2000 Hz/100 msec tone with a kiss off of 1600 Hz
3C Scancom - single dual-tone handshake 2300 Hz/100 msec
pause and 1400 Hz/100 msec tone with a kiss off of 1400 Hz
8D Single tone - DTMF handshake/kiss-off
EC SURTEC handshake
FB CFSK full duplex handshake
FF Perform inter-handshake time, no tone/frequency sent
To Next Page
Loading...
