Sur-Gard System I - Page 72

CHAPTER FIVE - OPTIONS: CHANNELS 1 and 2
65
SG-System I Operating Manual
5
Additional Notes:
When using the Vonk Handshake (1F), it is recommended that you program this option first (Option 181).
When using both Outel (1C) and CESA (1B), it is recommended that the Outel be programmed ahead in the handshake order.
Table 26: Specialty Handshakes
Hexadecimal Value Description
3D Single dual-tone handshake, DTMF buffering.
4D Double dual-tone handshake, DTMF buffering.
5D Single dual-tone handshake, maximum of 16 digits of DTMF, 1400 Hz/100
msec, 100 msec pause and 2300 Hz/100 msec tone with a kiss-off of 1400 Hz.
6D Single dual-tone handshake, enable Fast DTMF receive mode. 1400 Hz/100
msec, 100 msec pause and 2300 Hz/100 msec tone with a kiss-off of 1400 Hz.
7D Double dual-tone handshake, enable Fast DTMF receive mode. 1400 Hz/100
msec, 100 msec pause and 2300 Hz/100 msec tone with a kiss-off of 1400 Hz.
98 Do not perform AHS for this ANI number.
99 Immediate hangup, AHS has blocked it.
BE 1400 Hz BFSK only, no pulse.
BF 2300 Hz BFSK only, no pulse.
FB Full duplex CFSK.
FC Full duplex SIA.
FE ITI handshake, Modem IIE filter.