3-64 ENGINE
• Install the oil sump filter.
NOTE:
Face the protrusion on the oil sump filter to the top when install-
ing it.
CRANKCASE
• Wipe the crankcase mating surfaces (both surfaces) with a
cleaning solvent.
• Fit the dowel pins onto the left half on the crankcase.
• Apply engine oil to the conrod big end and gears.
• Apply SUZUKI BOND “1207B/1215” to the mating surface of
the right crankcase.
99104-31140: SUZUKI BOND “1207B” (USA)
99000-31110: SUZUKI BOND “1215” (Others)
To Next Page
Loading...
