ENGINE 3-47
CLUTCH COVER
DISASSEMBLY
• Remove the clutch release outer guide.
• Remove the bearing with the special tool.
09921-20240: Bearing remover set
NOTE:
If there is no abnormal noise, the bearing removal is not neces-
sary.
INSPECTION
Rotate the balls by hand to inspect for an abnormal noise and a
smooth rotation. Replace the clutch release ball assembly if
there is anything unusual.
REASSEMBLY
• Install the bearing with the special tool.
09913-70210: Bearing installer set
• Install the clutch release outer guide.
To Next Page
Loading...
