8-22 ELECTRICAL SYSTEM
LAMPS
HEADLIGHT
HEADLIGHT BULB REPLACEMENT
• Remove the socket covers (1, 2).
• Remove the socket 3.
• Remove the bulb.
• Install the new bulb in the reverse order of removal.
HEADLIGHT BEAM ADJUSTMENT
• Adjust the headlight vertical beam by loosening the screw 1.
Install the socket covers securely.
Headlight bulb: 12 V 30/30 W
(Right & Left)
If you touch the bulb with your bare hands, clean the bulb with a cloth moistened with
alcohol or soapy water to prevent premature bulb failure.
ITEM N·m kgf-m lb-ft
A 5.0 0.5 3.5
B 3.0 0.3 2.0
"
A Headlight mounting bolt
B Headlight beam adjusting screw
To Next Page
Loading...
