Suzuki Ozark - FRONT AND REAR WHEELS; FRONT WHEEL HUB

7-10 CHASSIS
FRONT AND REAR WHEELS
CONSTRUCTION
REMOVAL
FRONT AND REAR WHEELS
• Place the vehicle on level ground.
• Support the vehicle with a jack or wooden block.
• Remove the wheel.
FRONT WHEEL HUB
• Remove the front wheel. (See above)
• Remove the cotter pin, then loosen the wheel hub nut by
applying the front brake.
• Remove the wheel hub nut and washer.
• Remove the front brake caliper.
• Remove the front wheel hub 1.

• Remove the spacer 2.
• Remove the disc. (7-24)
ITEM N·m kgf-m lb-ft
A 23 2.3 16.0
B 50 5.0 36.0
c 75 7.5 54.0
 D 100 10.0 72.5
"
1 Front brake disc
2 Dust seal
3 Bearing
4 Spacer
5 Wheel hub
6Bearing
7 Dust seal
A Front brake disc bolt
B Wheel set nut
C Front wheel hub nut
D Rear wheel hub nut
,
Do not operate the brake lever while removing the cal-
iper.