CHASSIS 7-15
TIRES
TIRE REPLACEMENT
• Remove the front and rear wheels. (7-10)
• After removing the air valve cap, release the tire pressure by
depressing the valve.
• Dismount the bead from the rim completely as shown.
• Separate the tire from the rim by using a set of tire levers and
rim protectors.
• Apply tire lubricant to the tire bead and the flange of the rim.
• Mount the tire on the rim.
NOTE:
Inspect the sealing portion of the rim for contamination and dis-
tortion before installing the tire on the rim.
When using the tire lever, do not scratch or hit the
sealing portion (hump) of the wheel or it may cause
air-leakage.
Never apply grease, oil or gasoline to the tire bead
because they will deteriorate the tire.
The standard tire fitted on this vehicle is AT22
×
7-11
✩
for the front and AT22
×
10-9
✩
for the rear.
The use of tires other than the standard may cause
instability. It is highly recommended to use the speci-
fied tire.
To Next Page
Loading...
