7-14 CHASSIS
REAR WHEEL HUB
• Apply small amount of SUZUKI SUPER GREASE “A” to the
left wheel hub’s spline.
99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Install the rear wheel hub, washer and nut.
• Tighten the rear wheel hub nut to the specified torque.
Rear wheel hub nut: 100 N·m (10.0 kgf-m, 72.5 lb-ft)
• Install the cotter pin into the rear axle as shown.
• Install the rear wheel. (7-12)
NOTE:
Bend the cotter pin securely for fear that the cotter pin touches
the wheel center cap.
Do not apply grease to the right wheel hub.
Replace the removed cotter pin with a new one.
To Next Page
Loading...
