Suzuki Ozark - Neutral Relay Inspection; Parking Brake Switch

8-16 ELECTRICAL SYSTEM
Measure the relay coil resistance between the terminals using
the multi circuit tester. If the resistance is not within the specified
value, replace the starter relay with a new one.
 09900-25008: Multi circuit tester set
 Tester knob indication: Resistance (Ω)
 Starter relay resistance
Standard: 3 – 6 Ω
NEUTRAL RELAY INSPECTION
• Remove the neutral relay.
First check the insulation between A and B terminals with the
tester. Then apply 12 V to terminals as shown and check the
continuity between A and B. If there is no continuity, replace
the neutral relay with a new one.
 09900-25008: Multi circuit tester set
 Tester knob indication: Continuity set ()
PARKING BRAKE SWITCH
(8-26)