ELECTRICAL SYSTEM 8-25
DIODE
• Remove the fuel tank left side cover. (7-5)
• Remove the neutral switch diode.
Measure the voltage between the terminals using the multi cir-
cuit tester as indicated in the table below.
09900-25008: Multi circuit tester set
Tester knob indication: Diode test ()
✽ More than 1.4 V (tester’s battery voltage)
NOTE:
If the tester reads under 1.4 V when the tester probes are not
connected, replace the battery of multi circuit tester.
Unit: V
+ Tester probe
-
Tester
probe
ABC
A ✽✽
B 0.4 – 0.6 0.4 – 0.6
C ✽✽
To Next Page
Loading...
