7-30 CHASSIS
• Remove the cotter pins and nuts.
• Remove the steering knuckle 1 with a commercially available
ball bearing joint remover 2.
INSPECTION
FRONT SHOCK ABSORBER
Inspect the shock absorber for oil leakage or damage. If any
damages are found, replace the front shock absorber with a new
one.
Inspect the rubber bushing for wear or damage.
If any damages are found, replace the shock absorber with a
new one.
KNUCKLE
Inspect the knuckle for damage. If any damages are found,
replace the knuckle with a new one.
To Next Page
Loading...
