CHASSIS 7-49
• Remove the bearing by using the special tool.
09921-20240: Bearing remover set
• Install the bearing by using the special tool.
09913-70210: Bearing installer set
• When replacing the bolts, apply THREAD LOCK SUPER
“1360” to the bolts and install them to the brake panel.
99000-32130: THREAD LOCK SUPER “1360”
• Install the snap ring.
REASSEMBLY AND REMOUNTING
• Install the new dust seal 2 to the drum cover 3 by using the
removed dust seal 1.
• Apply SUZUKI SILICONE GREASE to the dust seal lips.
99000-25100: SUZUKI SILICONE GREASE
The removed bearing must be replaced with new ones.
Drum cover
Dust seal
To Next Page
Loading...
