Suzuki Ozark - Crankcase

3-48 ENGINE
CRANKCASE
BEARING INSPECTION
Rotate the bearing inner race by finger to inspect for abnormal
play, noise and smooth rotation while the bearings are in the
crankcase.
Replace the bearing in the following procedure if there is any-
thing unusual.
BEARING REMOVAL
• Remove the bearing retainers.
• Remove the bearing with the special tool.
 09921-20240: Bearing remover set
NOTE:
If there is no abnormal noise, the bearing removal is not neces-
sary.
• Use the special tool with proper bars.
BEARING INSTALLATION
• Install the bearing with the special tool.
 09913-70210: Bearing installer set
Play
Play