ENGINE 3-49
• Install the bearing retainers.
NOTE:
When installing the bearing retainers, apply a small quantity of
THREAD LOCK to the screws.
09900-32050: THREAD LOCK “1342”
OIL SEAL
• Remove the oil seal.
• Apply SUZUKI SUPER GREASE “A” to the oil seal.
99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Install the oil seal with the special tool.
09913-70210: Bearing installer set
ENGINE MOUNTING RUBBER
• Remove and install the engine mounting rubber with the spe-
cial tool.
09913-70210: Bearing installer set
Replace the removed oil seal with a new one.
To Next Page
Loading...
