DRIVE TRAIN 4-17
• Tighten the axle housing mounting bolts to the specified
torque.
Axle housing mounting bolt:
60 N·m (6.0 kgf-m, 43.5 lb-ft)
• Tighten the shock absorber mounting bolt to the specified
torque.
Shock absorber mounting bolt:
50 N·m (5.0 kgf-m, 36.0 lb-ft)
• Install the rear drive gear case under cover.
• Pour the specified hypoid gear oil (SAE #90) in through the
filler hole. (2-10)
Gear oil capacity: 190 ml (6.4/6.7 US/Imp oz)
• Install the rear brake cables. (9-17)
• Install the rear wheels. (7-12, 14)
To Next Page
Loading...
