Suzuki Ozark - Page 326

LT-F250K5 (’05-MODEL) 12-11
TIGHTENING TORQUE
CHASSIS
FRONT BRAKE CALIPER MOUNTING BOLT
Apply THREAD LOCK SUPER “1360” to the caliper mounting bolts before tightening them.
99000-32130: THREAD LOCK SUPER “1360”
ITEM N·m kgf-m lb-ft
Handlebar clamp bolt 26 2.6 19.0
Steering shaft holder bolt 23 2.3 16.5
Steering shaft nut 49 4.9 35.5
Steering knuckle nut (Upper & Lower)
* 29 * 2.9 * 21.0
Tie rod end nut 29 2.9 21.0
Tie rod locknut 29 2.9 21.0
Front shock absorber mounting nut (Upper) 55 5.5 40.0
bolt (Lower) 55 5.5 40.0
Wishbone arm pivot nut 65 6.5 47.0
Wheel hub nut (Front) 75 7.5 54.0
nut (Rear) 110 11.0 79.5
Wheel set nut (Front & Rear)
* 60 * 6.0 * 43.5
Brake master cylinder mounting bolt 10 1.0 7.0
Brake hose union bolt 23 2.3 16.5
Front brake air bleeder valve 6.0 0.6 4.4
Front brake disc bolt 23 2.3 16.5
Front brake caliper mounting bolt 26 2.6 19.0
Front brake pad mounting bolt 18 1.8 13.0
Front brake caliper holder pin 18 1.8 13.0
Front brake caliper holder slide pin 23 2.3 16.5
Footrest bolt
8 mm 26 2.6 19.0
10 mm 55 5.5 40.0
Rear brake pedal nut 12 1.2 8.5
Rear brake cam lever nut 11 1.1 8.0
Rear brake panel 60 6.0 43.5
Rear shock absorber mounting bolt (Upper) 60 6.0 43.5
nut (Lower) 60 6.0 43.5
Rear swingarm pivot nut 102 10.2 74.0
Headlight mounting bolt 5 0.5 3.5
Headlight beam adjusting screw 3 0.3 2.0