9-6 GEARSHIFTING
• Reassemble the gearshift cam shifter and pawl lifter.
• Apply THREAD LOCK SUPER “1322” to the screws.
• Tighten the screws.
99000-32110: THREAD LOCK SUPER “1322”
• Reassemble the gearshift return spring 1 to the gearshift
shaft properly.
• Align the center teeth on the gearshift shaft with the center
teeth on the gearshift cam shifter.
• Install the gearshift lever.
• Reassemble the clutch and clutch cover. (7-6)
• Install the kick starter lever, and clutch release arm.
• Pour transmission oil. (2-7)
• Pour engine coolant. (2-8)
To Next Page
Loading...
