13. BODY COVER
13-5
Rear fender
Remove rear carrier.
Pull the “Seat Release Bar” up in order to remove
the seat.
This seat release bar is under the rear side of the
rear fender.
Loosen the two bolts which connect the front
fender and rear fender.
Loosen the 2 bolts, which connect the rear tender
and frame, these 2 bolts just below the seat.
Loosen the 6 screws, which connect the rear
fender and footrest, these 6 screws just be twin
the rear fender two side.
Seat release bar
2 bolts
3 screws
To this chapter contents
2 bolts
To Next Page
Loading...
