4. FUEL SYSTEM
4-4
Carburetor Remove / Install
Removal
Drain out fuel in the float chamber.
Loosen the choke cable fixed iron sheet screw
from plate.
Remove the choke cable
Remove the carburetor top parts from the
carburetor.
Disconnect the fuel hose.
Release the clamp strip of air cleaner.
Release the 2 nuts of carburetor insulator, and
then remove the carburetor.
Installation
Install in reverse order of removal procedures.
Screw
Choke cable
Clamp screws
Choke cable
To this chapter contents
Fuel pipe
2 nuts
To Next Page
Loading...
