17. ELECTRICAL SYSTEM
17-13
Light / Bulb
Replacing bulb for headlight
Remove 1 screw for the headlight cover, and
remove the cover.
Turn the headlight bulb connector by clockwise.
Take out the bulb connector and the bulb.
Replace with new bulb if necessary.
Caution
y Never touch the bulb with finger, which will
create a heat point.
y Clean the fingerprint left on the bulb with
alcohol.
Install the bulb of the headlight in reverse order of
removal.
Upon completion of replacement, turn on the main
switch to ensure the headlight works well.
Adjust the beam and distance of the headlight if
necessary.
To this chapter contents
Headlight bulb seat
Headlight cover screw
Adjustment screw
To Next Page
Loading...
