4. FUEL SYSTEM
4-11
Air Cleaner
Removal
Loosen the clamp strip of air cleaner and
carburetor, and then remove the vapor hose.
Remove the air cleaner (2 bolts).
Installation
Install the tank in the reverse order of removal.
Cleaning air cleaner element
Loosen the clamp strip of left crankcase cover,
and then remove the left crankcase cover vapor
hose.
Loosen the clamp strip of air cleaner, and then
remove the air cleaner vapor hose.
Remove the air cleaner cover (3 screws).
Loosen the clamp strip of air cleaner element, and
then remove the air cleaner element.
Clean the element with non-flammable or
high-flash point solvent and then squeeze it for
dry.
Caution
Never use gasoline or acid organized solvent to
clean the element.
Soap the element into cleaning engine oil and then
squeeze it out. Install the element onto the
element seat and then install the air cleaner cover.
To this chapter contents
Element
Clamp
Clamp
2 bolts
3 screws
To Next Page
Loading...
