EasyManua.ls Logo

Sym Track Runner 200 - Periodical Maintenance Schedule

Sym Track Runner 200
221 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. MAINTENANCE INFORMATION
2-2
Periodical Maintenance Schedule
Maintenance
Code
Item
Every
300KM
1 Month
every
1,000KM
3 month
every
3,000KM
6 month
every
6000KM
1 year
every
12,000KM
15 month
every
14,500KM
1 Air cleaner
I C R
2 Fuel filter
I I R
3 Oil filter
C C
4 Engine oil change
R Replacement for every 1000 km
5 Tire pressure
I I
6 Battery inspection
I I
7 Brake & free ply check
I I
8 Steering handle check
I I
9 Cushion operation check
I I
10 Every screw tightening check
I I
11 Gear oil check for leaking
I I
12 Spark plug check or change
I I R
13 Gear oil change
R Replacement for every 5000 km
14 Frame lubrication
L
15 Exhaust pipe
I I
16 Ignition timing
I I
17 emission check in Idling
A I
18 Throttle operation
I I
19 Engine bolt tightening
I I
20 CVT driving device(belt)
I R
21 CVT driving device(roller)
C
22 Drive chain
I / L I / L
C
23
Lights/electrical
equipment/multi-meters
I I
24 Fuel lines
I I
25 Cam chain
I I
26 Valve clearance
I A
27
Lines & connections in cooling
t
I I
28 Coolant reservoir
I I
29 Coolant
I I R
Code: I ~ Inspection, cleaning, and adjustment R ~ Replacement
C ~ Cleaning (replaced if necessary) L ~ Lubrication
Have your ATV checked, adjusted, and recorded maintenance data periodically by your SYM Authorized Dealer to
maintain the ATV at the optimum condition
The above maintenance schedule is established by taking the monthly 1000 kilometers as a reference which ever
comes first.
Remarks: 1. Clean or replace the air cleaner element more often when the ATV is operated on dusty roads or in
the Heavily- polluted environment.
2. Maintenance should be performed more often if the ATV is frequently operated in high speed and
after the ATV has accumulated a higher mileage.
3. Preventive maintenance
a. Ignition systemPerform maintenance and check when continuous abnormal ignition, misfire,
after-burn, overheating occur.
b. Carbon deposit removalRemove carbon deposits in cylinder head, piston heads, exhaust system
when power is obvious lower. Than ever
To this chapter contents

Table of Contents

Related product manuals