ES3000 User Guide
4-38
4. Add Ports as untagged or tagged members, or select the Forbidden checkbox for the target
port to prevent dynamic membership via GVRP.
If a port is added to multiple VLANs as a tagged member, that port becomes an 802.1Q trunk
port.
5. By default, GVRP is enabled on all ports so dynamic VLAN membership can occur. Disable if
desired.
6. By default, All Frames are allowed, meaning untagged and tagged. Select the Admit
Tagged Only checkbox to drop untagged frames.
7. Select Apply to implement that changes made within the Create/Modify VLAN screen.
Select Restore to use the previously saved configuration.
To Next Page
Loading...
