Web Management Access
4-37
4.2.27 VLANs->VLAN Config->Creating/Modify VLAN
To create a VLAN, select the Create/Modify VLAN menu item.
For advanced users, refer Chapter 5 for CLI command modes.
To create a VLAN:
1. Specify a VLAN ID (between 2 - 4094) for the new target VLAN within the VLAN ID field.
VLAN #1 cannot be deleted under any circumstance.
2. Define whether the new VLAN is the management VLAN or not.
(Only 1 Management VLAN is permitted).
3. Assign the new VLAN a name within the VLAN Name field.
To Next Page
Loading...
