Symbol ES3000 - 5.16 802.1 x Commands

ES3000 User Guide
5-94
5.16 802.1x Commands
dot1x radius
Use the dot1x nas-id command to set 802.1x admin status.
dot1x radius <NASID>
SYNTAX DESCRIPTION: <NASID> String, ID for dot1x request to Radius server.
D
EFAULT VALUE:
C
OMMAND MODES: Global configuration
R
EFERENCE:
M
ENU:
EXAMPLE:
! NAS ID "dot1x_auth"
Switch(config)# dot1x radius dot1x_auth
Switch(config)#
dot1x port-control
Use the dot1x port-control command to set 802.1x port control status.
dot1x port-control <control>
D
EFAULT VALUE:
C
OMMAND MODES: Interface configuration
S
YNTAX DESCRIPTION: <control> auto The controlled Port is set to the
Authorized or Unauthorized state in
accordance with the outcome of an
authentication exchange between
the Supplicant and the
Authentication Server.
force-authorized The controlled Port is required to be
held in the Authorized state.
force-unauthorized The controlled Port is required to be
held in the Unauthorized state.