Administration Console Access
3-5
To use the arrow keys when attached to the User Interface via a Telnet Session to toggle forward and
backward. Choose Properties from the terminal pull-down menu and verify the VT100 Arrows
option is turned on.
3.2 User Interface
The switch provides a menu-driven interface for managing the switch, as well as a Command Line
Interface (CLI). The CLI uses text commands to manage the switch. The CLI is accessed through the
CMI. See Chapter 5 on page for detailed information on navigating the CLI.
3.3 Saving Configuration Changes
To save changes made within the menu-driven interface, refer to
Main Menu->System Admin.->Tools->Save Config. on page 3-24. Use the Save Config page to save
all updates to the menu-driven interface. Once updates are made refer back to the target
configuration page to ensure the updates have been implemented by the ES3000 Ethernet Switch.
To Next Page
Loading...
