Symbol ES3000 User Manual

ES3000 User Guide
5-102
5.17 Radius Commands
radius-server host
Use the radius-server host command to specify a RADIUS server host.
radius-server host < ip-address> [timeout <seconds>] [retransmit <retries>]
[key <string>]
no radius-server
S
YNTAX DESCRIPTION: ip-address IP address of the RADIUS server host
C
OMMAND MODES: Global configuration
R
EFERENCE:Cisco
M
ENU:
E
XAMPLE:
!Set radius server 192.168.0.1 timeout 5 second retransmit 4 times and
Shared Secret "karl_radius"
Switch(config)# radius-server host 192.168.0.1 timeout 5 retransmit 4 key
karl_radius
Switch(config)#
timeout (Optional) The time interval in seconds that the router
waits for the RADIUS server to reply before
retransmitting.
seconds The range is 1 to 1000.
retransmit (Optional) The number of times a RADIUS request is
re-sent to a server.
retries The range is 1 to 100.
key (Optional) Specifies the authentication and encryption
key used between the NAS and RADIUS server.
string (Optional) Text string.

Symbol ES3000 Specifications

General

Brand	Symbol
Model	ES3000
Category	Network Router
Language	English