ES3000 User Guide
3-22
3.5.11 Main Menu->System Admin.->Tools->Software Upgrade
If new improvements to the software on the switch become available, use the Software Upgrade
menu to upgrade the switch to the new software version. Once the IP address of the TFTP and the
name of the new software image file are properly configured, the user can upgrade the software with
command on this menu. See Chapter 2, Firmware Upgrades when updating software.
The previous version of runtime image is lost when the
procedure completes.
Use the Software Upgrade menu for:
• Setting the TFTP Server IP Address
• Setting the Image File Name
• Upgrading the Image
To Next Page
Loading...
