Symbol ES3000 - Link Aggregation Commands

ES3000 User Guide
5-42
5.9 Link Aggregation Commands
lacp
Use the lacp command to add ports to a port LACP group or delete ports from the group.
lacp <trunkKEY> <port list> <mode>
SYNTAX DESCRIPTION: <trunkKEY> Trunk LACP key
<port list> A list of port instances
<mode>
DEFAULT VALUE: The feature is disabled by default.
C
OMMAND MODES: Global configuration
R
EFERENCE:HP
M
ENU:
Option Meaning
Active The port automatically sends LACP
protocol packets.
Passive The port does not automatically send
LACP protocol packets, and responds
only if it receives LACP protocol packets
from the opposite device.
Manual Static link aggregation