Symbol ES3000 - 5.11 Multiple Spanning Tree Commands

Command Line Interface
5-51
5.11 Multiple Spanning Tree Commands
spanning-tree mst
Use the spanning-tree mst command to enable or disable multiple spanning tree.
spanning-tree mst enable
spanning-tree mst disable
S
YNTAX DESCRIPTION: The spanning-tree mst command has no arguments or keywords.
D
EFAULT VALUE:
C
OMMAND MODES: Global configuration
R
EFERENCE:
M
ENU:
E
XAMPLE:
!Enable MSTP
Switch(config)# spanning-tree mst
Switch(config)#
!Disable MSTP
Switch(config)# no spanning-tree mst
Switch(config)#
spanning-tree mst name
Use the spanning-tree mst name command to configure the MSTP region name.
spanning-tree mst name <name>
S
YNTAX DESCRIPTION: <name> Region name
D
EFAULT VALUE:
C
OMMAND MODES: Global configuration
R
EFERENCE:
M
ENU: