Symbol ES3000 - IGMP Snooping Commands

ES3000 User Guide
5-68
5.12 IGMP Snooping Commands
ip igmp snooping
Use the ip igmp snooping command to enable or disable IGMP snooping as implemented in the
system.
ip igmp snooping
no ip igmp snooping
S
YNTAX DESCRIPTION: The ip igmp snooping command has no argument.
D
EFAULT VALUE: The feature is disabled by default.
C
OMMAND MODES: Global configuration
R
EFERENCE:Cisco
M
ENU: Advanced Switch Configuration Menu->IGMP Snooping->Enable/Disable
IGMP Snooping
E
XAMPLE:
!Enable igmp snooping
Switch(config)# ip igmp snooping
Switch(config)#
!Disable igmp snooping
Switch(config)# no ip igmp snooping
Switch(config)#
ip igmp snooping aging-time
Use this command to configure the router and host port aging time for an IGMP snooping operation.
ip igmp snooping aging-time {router | host} <sec>
S
YNTAX DESCRIPTION: The router port aging time is integer value ranges from 60 to 600.
The host port aging time is integer value ranges from 130 to 1225.
D
EFAULT VALUE: The default value is 260 seconds for the host port, and 125 seconds for
the router port.
C
OMMAND MODES: Global configuration
R
EFERENCE: None