Command Line Interface
5-103
show radius-server
Use the show radius-server command to display Radius configure information.
show radius-server
S
YNTAX DESCRIPTION: The show radius-server command has no arguments or keywords.
D
EFAULT VALUE: The show radius-server command has no default setting.
C
OMMAND MODES: Privileged EXEC
R
EFERENCE:
M
ENU:
E
XAMPLE:
Switch# show radius
Server IP Address : 192.168.0.1
Shared Secret : Karl_
Response Time : 5 seconds
Maximum Retransmission : 2
Switch#
To Next Page
Loading...
