Symbol ES3000 - Page 176

ES3000 User Guide
5-8
enable
The enable command changes the command mode from User EXEC to privExec mode.
enable
S
YNTAX DESCRIPTION: The enable command has no arguments or keywords.
D
EFAULT VALUE: The enable command has no default setting.
C
OMMAND MODES: User EXEC
R
EFERENCE:Cisco
EXAMPLE:
Switch>enable
Switch#
configure
The configure command moves to the Global Configuration (config) command mode and identifies the
source for the configuration commands.
configure
S
YNTAX DESCRIPTION: The configure command has no arguments or keywords.
D
EFAULT VALUE: The configure command has no default setting.
C
OMMAND MODES: Privileged EXEC
R
EFERENCE: Nortel
E
XAMPLE:
Switch# configure
Switch(config)#