ES3000 User Guide
5-44
lacp port-priority
Use the lacp port-priority command to LACP port priority.
lacp port-priority <priority-value>
S
YNTAX DESCRIPTION: <priority-value> Lacp port priority 0-255
D
EFAULT VALUE:
C
OMMAND MODES: Interface configuration
R
EFERENCE:Cisco
M
ENU:
E
XAMPLE:
! set port 3 port-priority 40
Switch(config)# interface fastethernet0/3
Switch(config-if)# lacp port-priority 40
Switch(config-if)#
show lacp
Use the show lacp command to display link aggregation information.
show lacp
S
YNTAX DESCRIPTION: <LA-KEY> link aggregation LACP key.
D
EFAULT VALUE: The show lacp command has no default setting.
C
OMMAND MODES: Privileged EXEC
R
EFERENCE: Nortel
M
ENU:
To Next Page
