Symbol ES3000 - Page 215

Command Line Interface
5-47
mac-address-table aging-time
Use the mac-address-table aging-time command to control aging time for dynamic MAC addresses.
mac-address-table aging-time<sec>
S
YNTAX DESCRIPTION: Integer ranges from 10 - 1000000.
D
EFAULT VALUE: Default value is 300.
C
OMMAND MODES: Global configuration
R
EFERENCE:Cisco
M
ENU: Basic Switch Configuration Menu -> Forwarding Database->
Set Age-Out time
E
XAMPLE:
! Set Age-Out time 300 sec
Switch# mac-address-table aging-time 300
Switch(config)#
show mac-address-table aging-time
Use the show mac-address-table aging-time command to display MAC address table.
show mac-address-table aging-time
S
YNTAX DESCRIPTION: The show mac-address-table aging-time command has no arguments or
keywords.
D
EFAULT VALUE: This command has no default setting.
C
OMMAND MODES: Privileged EXEC
R
EFERENCE:Cisco
M
ENU: Basic Switch Configuration Menu -> Forwarding Database Menu
E
XAMPLE:
Switch# show mac-address-table aging-time
Aging time: 300 Sec(s)
Switch(config)#