Symbol ES3000 - Page 221

Command Line Interface
5-53
MENU:
E
XAMPLE:
!Set STP Compatible
Switch(config)# spanning-tree mst version stpCompatible
Switch(config)#
spanning-tree mst max-hops
Use the spanning-tree mst max-hops command to configure the maximum hops count.
spanning-tree mst max-hops<hop>
S
YNTAX DESCRIPTION: <hop> Integer ranges from 6 to 40
D
EFAULT VALUE:
C
OMMAND MODES: Global configuration
R
EFERENCE:
M
ENU:
EXAMPLE:
!Set Max Hop 40
Switch(config)# spanning-tree mst max-hops 40
Switch(config)#
spanning-tree mst priority
Use the spanning-tree mst priority command to configure the CIST bridge priority value.
spanning-tree mst priority <priority>
S
YNTAX DESCRIPTION: <priority> Valid priority vales are: 4096, 8192, 12288, 16384,
20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344
and 61440. All other values are rejected.
D
EFAULT VALUE: 0x8000
C
OMMAND MODES: Global configuration
R
EFERENCE:
M
ENU: