Symbol ES3000 - Page 226

ES3000 User Guide
5-58
! Disable MSTP on port 4
Switch(config)# interface fastethernet0/4
Switch(config-if)# spanning-tree mst shutdown
Switch(config)#
spanning-tree mst port-priority
Use the spanning-tree mst port priority command to configure CIST Port Priority.
spanning-tree mst port-priority <priority>
S
YNTAX DESCRIPTION: <priority> Valid priority values are 0, 16, 32, 48, 64, 80, 96, 112,
128, 144, 160, 176, 192, 208, 224, and 240. All other values are rejected.
D
EFAULT VALUE:
C
OMMAND MODES: Interface configuration
R
EFERENCE:
M
ENU:
E
XAMPLE:
! Set CIST port priority 64 on port 4
Switch(config)# interface fastethernet0/4
Switch(config-if)# spanning-tree mst port-priority 64
Switch(config-if)#
spanning-tree mst cost
Use the spanning-tree mst cost command to configure the CIST Port Path Cost.
spanning-tree mst cost <cost>
S
YNTAX DESCRIPTION: <cost> Integer ranges from 1 to 200000000, 0 for auto detect
D
EFAULT VALUE:
C
OMMAND MODES: Interface configuration
R
EFERENCE:
M
ENU: