Symbol ES3000 - Page 228

ES3000 User Guide
5-60
spanning-tree mst edgeport
Use the spanning-tree mst edgeport command to configure the Edge Port Status in MSTP.
spanning-tree mst edgeport
S
YNTAX DESCRIPTION: The spanning-tree mst edgeport command has no arguments or
keywords.
D
EFAULT VALUE:
C
OMMAND MODES: Interface configuration
R
EFERENCE:
M
ENU:
E
XAMPLE:
! Set Edge port TRUE on port 4
Switch(config)# interface fastethernet0/4
Switch(config-if)# spanning-tree mst edgeport
Switch(config-if)#
! Set Edge port FALSE on port 4
Switch(config)# interface fastethernet0/4
Switch(config-if)# no spanning-tree mst edgeport
Switch(config-if)#
spanning-tree mst point-to-point
Use the spanning-tree mst point-to-point command to configure the Point-To-Point Status of a Port in
MSTP.
spanning-tree mst point-to-point <status>
S
YNTAX DESCRIPTION:<status>
Status Meaning
forcetrue Force TRUE
forcefalse Force FALSE
auto Auto detection