Command Line Interface
5-71
EXAMPLE:
Switch# show ip igmp snooping conf
IGMP Snooping Status : Enabled
Host Port Age-Out Time : 260 sec
Router Port Age-Out Time : 300 sec
Report Forward Interval : 10 sec
Switch#
show mac-address-table multicast
Use this command to display Layer2 multicast entries information for VLAN.
show mac-address-table multicst
S
YNTAX DESCRIPTION: This command has no arguments or keywords.
D
EFAULT VALUE: This command has no default setting.
C
OMMAND MODES: Privileged EXEC
R
EFERENCE:Cisco.
M
ENU: Advanced Switch Configuration Menu -> IGMP Configuration Menu
E
XAMPLE:
Switch# show mac-address-table multicast
VLAN ID Group MAC Address Group Members
------- ----------------- -------------
Switch#
To Next Page
