Symbol ES3000 - Page 246

ES3000 User Guide
5-78
show vlan
Use the show-vlan command to display VLAN information.
show vlan <vlanID>
S
YNTAX DESCRIPTION: <vlanID> VLAN ID.
D
EFAULT VALUE: The show vlan command has no default setting.
C
OMMAND MODES: Privileged EXEC
R
EFERENCE: Foundry
M
ENU: Advanced Switch Configuration -> VLAN Management Menu
E
XAMPLE:
Switch# show vlan all
VLAN Name Type Mgmt Ports
---- ----------------------------- --------- ------------------------
1 Default VLAN Permanent UP Fa1, Fa2, Fa3, Fa4
Fa5, Fa6, Fa7, Fa8
Fa9, Fa10, Fa11,
2 VLAN-2 Static UP Fa1, Fa2, Fa3
3 VLAN-3 Dynamic DOWN Fa1, Fa3
Switch#
gvrp
Use the gvrp command to enable or disable the GVRP protocol implemented in the system.
gvrp
no gvrp
S
YNTAX DESCRIPTION: The gvrp command has no argument.
D
EFAULT VALUE: The gvrp feature is disabled by default.
C
OMMAND MODES: Global configuration
R
EFERENCE:HP
M
ENU: Advanced Switch Configuration Menu->VLAN Management->
Set GVRP Status