Symbol ES3000 User Manual

ES3000 User Guide
3-2
The following are Symbol recommended terminal-emulation programs:
• HyperTerminal (which is built into the Microsoft Windows operating systems)
• ZTerm (Apple Macintosh)
• TIP (UNIX workstation)
To set up the connection using a HyperTerminal on a PC (but other systems follow similar steps):
1. Click the Start button. Select Accessories and Communications.
2. Select HyperTerminal.
The Connection Description screen displays.
3. Enter a name for the connection. Click OK.
4. The Connect To screen displays. In the bottom, drop down box labeled Connect using,
choose the COM port the switch connects to. Click OK.

Symbol ES3000 Specifications

General

Brand	Symbol
Model	ES3000
Category	Network Router
Language	English