116
(Continued)
Bluetooth
®
Pairing cannot be completed.
• Check the Bluetooth
®
device condition.
• The Bluetooth connection is not available when
“Pure Amplification” is set to “On” or “Network/
USB-A/Bluetooth” is set to “Disabled”. Set “Pure
Amplification” to “Off”. (⇒ 64)
The device cannot be connected.
• The pairing of the device was unsuccessful or the
registration has been replaced. Try re-pairing the
device. (⇒ 48)
• This unit might be connected to a different device.
Disconnect the other device and try re-pairing the
device.
The device is connected, but audio cannot be
heard through this unit.
• For some built-in Bluetooth
®
devices, you have
to set the audio output to this unit manually.
Read the operating instructions for the device for
details.
The sound is interrupted.
• The device is out of the 10 m communication
range. Bring the Bluetooth
®
device closer to this
system.
• Remove any obstacle between this system and the
device.
• Other devices that use the 2.4 GHz frequency
band (wireless router, microwaves, cordless
phones, etc.) are interfering. Bring the Bluetooth
®
device closer to this system and distance it from
the other devices.
• Select “Mode1” for stable communication. (⇒ 50)
To Next Page
Loading...
Need help?
General
