50
(Continued)
Operations during playback
Stop [ ]
Pause
[
]
• Press again to resume.
Skip [
] [ ]
Note
• To use this unit’s remote control/playback
operation buttons with a Bluetooth
®
device, the
Bluetooth
®
device must support AVRCP (Audio
Video Remote Control Profile). Depending on the
status of the device, some controls may not work.
• When enjoying video contents with this
function, the video and audio output may not be
synchronised.
Disconnecting a Bluetooth
®
device
1 Press [MENU].
2 Press [
], [ ] repeatedly to select
“Disconnect?” and then press [OK].
3 Press [
], [ ] to select “Yes” and then
press [OK].
Note
• The Bluetooth
®
device will be disconnected if a
different audio source is selected.
Bluetooth
®
transmission mode
If a Bluetooth
®
device is already connected,
disconnect it.
1 Press [MENU].
2 Press [
], [ ] repeatedly to select “Link
Mode” and then press [OK].
3 Press [
], [ ] to select the mode and
then press [OK].
Mode1:
Emphasis on connectivity
Mode2:
Emphasis on sound quality (default)
Note
• Select “Mode1” if the sound is interrupted.