Technics SU-GX70 User Manual

27
Connections
AC mains lead
AC mains lead connection
Connect only after all other connections are
completed.
AC IN terminal
To a household mains socket
AC mains lead
(supplied)
• Use only the supplied AC mains lead.
• Do not connect the AC mains lead until all other
connections are complete.
• Insert the plugs of the cables to be connected all
the way in.
• Do not bend cables at sharp angles.
• Wireless LAN (Wi-Fi
®
) setting may start when this
unit is turned on. To stop the Wi-Fi setting, select
“No” in “Wi-Fi Setup” screen. Select “Yes” to keep
the Wi-Fi setting. (⇒ 31)
Note
• This unit consumes a small amount of AC power
(⇒ 128) even when the unit is in standby mode.
Remove the plug from the main electrical outlet
if you will not be using the unit for an extended
period of time. Place the unit so the plug can be
easily removed.
• Set “Wi-Fi Menu” to “Off” to shorten the start-
up time of this unit if you will not use the Wi-Fi
function. (⇒ 100)

Technics SU-GX70 Specifications

General

Type	Integrated Amplifier
Input Impedance	47 kΩ
Speaker Impedance	4Ω - 16Ω
USB-A Playback	Yes
Power Supply	AC 220-240V, 50Hz/60Hz
Power Consumption	65 W
Input Sensitivity	200 mV
Digital Audio Inputs	Coaxial
Analog Audio Inputs	RCA
Analog Audio Outputs	RCA x1
Headphone Output	Yes
Ethernet Interface	Yes
Wi-Fi	Yes
Bluetooth	Yes (4.2, A2DP, SBC, AAC)
Streaming Services	Spotify, TIDAL, Deezer, Internet Radio