Technics SU-GX70 User Manual

17
Control reference guide
This unit (front)
01 02 03 0504 06 0807 09
01 [ ] Standby/on button
• Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
02 Power indicator
• Blue: The unit is on.
• Off: The unit is off.
 Red: The unit is in standby mode.
03 Headphones jack
• When a plug is connected, the speakers and
PRE OUT terminals do not output sound.
(⇒ 109)
• Excessive sound pressure from earphones and
headphones can cause hearing loss.
• Listening at full volume for long periods may
damage the user’s ears.
04 USB-A terminal (USB-A)
(For AV) (DC 5 V
500 mA)
(⇒ 52, 102)
05 Remote control signal sensor
• Reception distance:
Within approx. 7 m directly in front
• Reception angle:
Approx. 30° left and right
06 Volume knob
• -- dB (min), -99.0 dB to 0 dB (max)
07 Display
• Input source, playback status, etc. are
displayed.
08 Touch switches
• [
], [ ], [ ], [ ]:
Playback operation buttons
• Each time you press the switch, a beep sound
will be heard. (⇒ 99)
09 Input selector knob
• Turn this knob clockwise or anticlockwise to
switch the input source.

Technics SU-GX70 Specifications

General

Type	Integrated Amplifier
Input Impedance	47 kΩ
Speaker Impedance	4Ω - 16Ω
USB-A Playback	Yes
Power Supply	AC 220-240V, 50Hz/60Hz
Power Consumption	65 W
Input Sensitivity	200 mV
Digital Audio Inputs	Coaxial
Analog Audio Inputs	RCA
Analog Audio Outputs	RCA x1
Headphone Output	Yes
Ethernet Interface	Yes
Wi-Fi	Yes
Bluetooth	Yes (4.2, A2DP, SBC, AAC)
Streaming Services	Spotify, TIDAL, Deezer, Internet Radio