Technics SU-GX70 User Manual

52
Operations
Using USB device
(Continued)
You can connect a USB device to the unit
and play back music stored on the USB
device.
• Refer to “USB” (⇒ 123) for information
about the USB device this unit can play
back.
USB device
1 Connect a USB device to the unit.
2 Press [USB] repeatedly to select
“USB-A”.
• The folder/content selection screen will be
displayed.
3 Press [ ], [ ] to select an item and then
press [OK].
• Repeat this step to make further selections.
• Press [RETURN] to return to the previous folder.
Operations during playback
Stop [ ]
Pause
[
]
• Press again to resume.
Skip [
] [ ]
Search Press and hold [
] or [ ].
View
available
information
[INFO]
• Press repeatedly to switch the
information.
• This operation may not be available for some
formats.

Technics SU-GX70 Specifications

General

Type	Integrated Amplifier
Input Impedance	47 kΩ
Speaker Impedance	4Ω - 16Ω
USB-A Playback	Yes
Power Supply	AC 220-240V, 50Hz/60Hz
Power Consumption	65 W
Input Sensitivity	200 mV
Digital Audio Inputs	Coaxial
Analog Audio Inputs	RCA
Analog Audio Outputs	RCA x1
Headphone Output	Yes
Ethernet Interface	Yes
Wi-Fi	Yes
Bluetooth	Yes (4.2, A2DP, SBC, AAC)
Streaming Services	Spotify, TIDAL, Deezer, Internet Radio