Technics SU-GX70 User Manual

57
Operations
Using HDMI equipment
(Continued)
When HDMI equipment supporting ARC
(Audio Return Channel) function such as TV,
etc. is connected with this unit using HDMI
cable (not supplied), you can output the TV
sound with this unit and also use HDMI CEC
(Consumer Electronics Control) function
such as “HDMI Selector Link”, “Power On
Link”, etc.
Connecting HDMI equipment with
ARC function (TV, etc.)
TV, etc.
HDMI cable
(not supplied)
■
Preparation
• Set the audio output setting of the connected
equipment and select PCM as output audio signal.
1 Disconnect the AC mains lead.
2 Connect this unit and an equipment.
• Use Premium High Speed HDMI cable when
connecting to peripheral device.
3 Connect the AC mains lead to this unit.
(⇒ 27)
4 Press [
] to turn this unit on.
5 Press [>INPUT<] repeatedly to select
“HDMI ARC”.
• You can also select the input source by turning
the input selector knob on the unit.
6 Start playback on the connected
equipment.

Technics SU-GX70 Specifications

General

Type	Integrated Amplifier
Input Impedance	47 kΩ
Speaker Impedance	4Ω - 16Ω
USB-A Playback	Yes
Power Supply	AC 220-240V, 50Hz/60Hz
Power Consumption	65 W
Input Sensitivity	200 mV
Digital Audio Inputs	Coaxial
Analog Audio Inputs	RCA
Analog Audio Outputs	RCA x1
Headphone Output	Yes
Ethernet Interface	Yes
Wi-Fi	Yes
Bluetooth	Yes (4.2, A2DP, SBC, AAC)
Streaming Services	Spotify, TIDAL, Deezer, Internet Radio