30
(Continued)
Wired LAN connection
Broadband router, etc.
LAN cable
(not supplied)
1 Disconnect the AC mains lead.
2 Connect this unit to a broadband router,
etc. using a LAN cable.
3 Connect the AC mains lead to this unit.
(⇒ 27)
4 Press [
] to turn this unit on.
• When the connection is established, “ ” is
displayed.
5 Press [>INPUT<] to select “Chromecast
built-in™”.
(Using Google Home app)
6 Open the Google Home app and follow
the on-screen instructions to set up a
connection. (⇒ 35)
(Using Apple Home app)
6 Open Apple Home app and follow
the on-screen instructions to set up a
connection. (⇒ 35)
Note
• While the AC mains lead is disconnected, the LAN
cable must be connected or disconnected.
• Use category 7 or above straight LAN cables (STP)
when connecting to peripheral devices.
• Inserting any cable other than a LAN cable in the
LAN port can damage the unit.
• When a LAN cable is connected, the Wi-Fi function
may be disabled.
To Next Page
Loading...
