35
(Continued)
■
Using the Google Home app or Apple Home
app
“Wi-Fi Setup”
1 Open the Google Home app or Apple
Home app and follow the on-screen
instructions to set up a connection.
• When the connection is established, “Success”
is displayed.
“Fail” may be displayed if the connection was
not complete. Try this method again from the
setup menu. If “Fail” is still displayed, try other
methods.
2 Press [OK] to exit the setting.
Note
• This unit will be displayed as “Technics-SU-
GX70-
****
” if the device name is not set. (“
****
”
stands for characters unique to each set.)
• You can check your network information (SSID,
MAC address and IP address) from the Google
Home app or “Technics Audio Center” app.
• Some items on the Google Home app are
irrelevant to this unit.
Streaming music over the network
This unit is compatible with Chromecast-enabled
apps. For detailed information of Chromecast-
enabled apps, visit:
g.co/cast/apps
You can also stream music files from the device on
your network to this unit by using the “Technics
Audio Center” app. Download and install the app
from the website below.
www.technics.com/support/
And, you can also stream music over AirPlay.
■
Preparation
• Complete the network settings. (⇒ 28)
(Make sure that the network is connected to the
Internet.)
• Install the supported application on your device.
• Connect the device to the network currently used
at home.
1 Open a Chromecast-enabled app,
AirPlay-enabled app (⇒ 92) or “Technics
Audio Center” app on your device
(smartphone, tablet, etc.), and select
this unit as the output speaker.
2 Play back the music.
To Next Page
Loading...
Need help?
General
