Technics SU-GX70 User Manual

96
Settings
Sound adjustment
(Continued)
1 Press [SETUP].
2 Press [
], [ ] repeatedly to
select the menu and then press
[OK].
3 Press [
], [ ], [ ], [ ] to set,
and press [OK].
Adjusting BASS/TREBLE
“Tone Control”
You can adjust the tone of this unit. Each tonal
range (BASS/TREBLE) can be adjusted.
• To enable this function, select “On (adjustment)”.
• Each level can be adjusted between “- 10” and
“+ 10”.
• “TONE” is displayed after setting.
• The factory default is “Off”.
Adjusting balance of speakers
“Balance L/R”
Adjusts the balance of the output from left and
right speakers.
• The audio output from the connected headphones
and PRE OUT terminals are also adjusted.

Technics SU-GX70 Specifications

General

Type	Integrated Amplifier
Input Impedance	47 kΩ
Speaker Impedance	4Ω - 16Ω
USB-A Playback	Yes
Power Supply	AC 220-240V, 50Hz/60Hz
Power Consumption	65 W
Input Sensitivity	200 mV
Digital Audio Inputs	Coaxial
Analog Audio Inputs	RCA
Analog Audio Outputs	RCA x1
Headphone Output	Yes
Ethernet Interface	Yes
Wi-Fi	Yes
Bluetooth	Yes (4.2, A2DP, SBC, AAC)
Streaming Services	Spotify, TIDAL, Deezer, Internet Radio